The UMBRA base profile is installed along the perimeter of the wall – this is the main element. Then, using the damper connection, we can install any other part of the system – from the shadow profile to the ventilation system with RAC.

The profiles are fully compatible and cover 99% of your plasterboard ceiling installation needs. Shadow joints, soaring ceilings, cornice and ventilation systems.

Two-piece ceiling profile, mounted with the ceiling frame to provide a decorative gap of 7 mm. The connection to the wall is ensured by the UMBRA base profile through a movable polymer element.

It can be connected with any profile from the UMBRA system.

Ceiling support profile, mounted in the ceiling frame, serving as a base for UMBRA cornice profiles of different widths (115 mm and 140 mm), as well as for UMBRA expander, which provide connection to the wall with the UMBRA base profile through a movable polymer element.

When using two profiles connected by UMBRA cornice profiles of different widths, it is possible to install anywhere on the ceiling without connection to the wall.

The shape of the profile allows to install the strip and cover it with a complete diffuser.

Supporting ceiling profile, mounted in the ceiling frame, serving as a base for UMBRA cornice profiles of different widths (115 mm and 140 mm), as well as for UMBRA expander, which provide connection to the wall with the UMBRA base profile through a movable polymer element.

When using two profiles connected by UMBRA eaves (115 mm) and UMBRA (140 mm) it is possible to install them anywhere on the ceiling without connection to the wall.

Two-piece ceiling profile, mounted with the ceiling frame to provide a decorative gap of 30 mm. The connection to the wall is ensured by the UMBRA base profile through a movable polymer element.

The shape of the profile allows to install the strip and cover it with a complete diffuser.

Two-piece ceiling profile with perforations for ventilation, with the possibility of installing a static pressure chamber (SPC) for localized movement of air masses. It is mounted with the ceiling frame to provide a decorative gap of 30 mm. The connection with the wall is provided by the base profile UMBRA through a movable polymer element.

The shape of the profile allows to install the strip and cover it with a complete diffuser.

The UMBRA RAC uses ERA 612rp20p adapter or 620VP 60 to 204 duct.

RAC test protocol

Element for arbitrary expansion of the visible gap for the UMBRA structural profile from 30 to 100 mm.

There are two ways of installation:

1. Against the wall with the UMBRA base profile through a movable polymer element
2. Arbitrarily anywhere on the ceiling using the UMBRA construction profile with or without illumination.

There are two ways of installation:

1. Against the wall with the UMBRA base profile through a movable polymer element
2. Arbitrarily anywhere on the ceiling using the UMBRA construction profile with or without illumination.

LONER is an independent perimeter profile that forms a shadow gap. We recommend installing it if the project does not include any perimeter solutions except for the shadow gap.

Ceiling profile mounted to the wall along the perimeter of the room to provide a decorative gap of 7 mm, is a support for the ceiling frame.

A soft insert on the profile compensates for linear movement of the plasterboard.